RPI

UNLOADER VALVE Right angle quick exhaust valve with (2) 1/4" FPT ports and (1) 3/8" FPT exhaust port Port size: 1/4" FPT x 1/4" FPT x 3/8" FPT Material: Aluminum body and Buna N diaphragm Includes: Unloader Valve, Adaptor (RPI...

TELEMETRY CABLE-3 LEAD SNAP HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Number of Leads: 3 Length: 30" Equipment End: 3-Lead Safety Block Patient End: Fixed Snap Color: Red, Black, and White See NOTES Below Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KCB029

PATIENT CABLE-3 LEAD DIN ABBOTT Number of Leads: 3 Length: 10 ft. Equipment End: 6-Pin; 1K Ω Resistors Patient End: Din/Unshielded; .060" PIN (Safety) Color: White, Red, and Black For available Leadwire Sets, see Notes below Model(s) This Part Fits:...

HEPA Filter for Tuttnauer RPF644 Tuttnauer Hepa Filter, 2.5" lg., Accomodates tubing with ID of 1/4"-3/8", For use with air or gasses only, Includes (1 pc) Cable Tie (12" Black), Fits Model(S):2340EA, 2340EKA, 2540EA, 2540EHS, 2540EKA, 3870EA, 3870EHS, Delta 10"...

OVERLAY (CONNECTOR PANEL) Size: 2.12" x 13.44" Adhesive Backing Also available: Keypad (Front Panel) (RPI Part #CVP012) Fits: Front Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CVP013

RETURN HOSE Length: ~32.00" Fittings: 7/16-20 Female x 1/2-20 Inverted Flare 90˚ Elbow Fits: Pump to Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH101

FLOW REGULATOR (0.5 GPM) Material: Nickel plated brass Ports: 3/8" FPT x 3/8" MPT Included in: Water Control Assembly (1 HP) (RPI Part #VPA001) Fits: Water Control Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=VPR009

FLOW REGULATOR (0.75 GPM) Material: Nickel plated brass Ports: 3/8" FPT x 3/8" MPT Fits: Water Control Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=VPR027

FLOW REGULATOR (1.5 GPM) Material: Nickel plated brass Ports: 3/8" FPT x 3/8" MPT Fits: Water Control Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=VPR028

POWER HOSE KIT Material: Neoprene Length: ~26.5 in. Fitting: 7/16-20 female both ends Fits: Base to Tilt Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIH005

Skin Temperature Probe (Reusable) OMP012

5 LEADWIRE SET-40" DUAL/SNAP ABBOTT Reusable Number of Leads: 5; Length: 40" Equipment End: Dual/Shielded; Patient End: Snap Color: Red, White, Green, Black, and Brown Includes: 5 Lead Shielded Acc Kit (RPI Part #LAK007) For Disposable Leadwire set see, (RPI...

3 LEADWIRE SET - 30" MULTI-LINK/SNAP COROMETRICS (GE) Number of Leads: 3 Bonded Leadwires Length: 30" Equipment End: Dual/Shielded; Jumper 1 to 5 with 130M Ω Resistors; Compatible with GE Multi-link® Patient End: Snap Colors: Red, Black and White Includes:...

SAFETY SWITCH CLAY ADAMS® (BECTON DICKINSON) Switch: 125/250VAC, 10.1 AMP Includes switch, wire and insulated connectors Fits: Under rear of lid Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS106

TELEMETRY CABLE - 3 LEAD SNAP HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Number of leads: 3 Length: 30" Equipment End: Dual/Shielded Patient End: Fixed Snap Color: Black, Red, and White Also Available: 3 Lead Organizer (RPI Part #LAR004) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KCB031

THERMISTOR PROBE Material: 316 stainless steel housing Rated: 5000Ω at 25˚C Fits: Thermistor Arm Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATT662

HOLD SWITCH CLAY ADAMS® (BECTON DICKINSON) DPDT 3A, 125VAC; 1A, 250VAC Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAS069

PRESSURE RELIEF VALVE Brass Fits 5/16" dia. mounting hole Includes: 1/4" Tubing Compression Nut, Ferrule and mounting hardware Included in: Pressure Switch (RPI Part #CMS052 and RPI Part #CMS057) Fits: Pressure Switch Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CMV059